
Backup power supply system for 19-inch standard rectifier power telecommunication cabinet
1. 6U 27KW Rectifier System
The "48VDC Rectifier System" typically refers to a direct current (DC) power system that outputs 48 volts (VDC). Such systems are commonly used in telecommunications,
data centers, industrial control, and other applications requiring stable DC power.
The rectifier, the key component of this system, primarily functions to convert alternating current (AC) electricity into direct current (DC) electricity.
ET48450 consists of distribution unit, rectifier module, conversion module, monitoring module. The standard as table below:
Configuration | Rectifier module | Remark |
Standard | GB 4943 | For details, please refer to the specifications of modules |
Standard | IEC/EN 62368-1 | |
Standard | EN 55032 Class A,GR1089 Issue 4 ,R3-10, R3-11, R3-12 Class B certified by North America | |
Standard | EN300386,CLASSA |
2. 5U 27KW Rectifier System Quick Details:
AC Distribution | DC Distribution | ||
Input Mode | 380VAC three-phase | Output Voltage | 42 to -58VDC,rated value:-53.5VDC |
Input Capacity | 63A | Load Breaker | LLVD:63A/1Px8;Llvd2:63A/1Px8 BLVD:63A/1Px8, No circuit breaker by default,user self configuration |
Input Frequency | 45 to 66Hz,rated value:50Hz/60Hz | SPD | 10kA/20kA,8/20μs |
Rectifier | Controller | ||
Input Voltage | 85 to 290VAC,rated 220VAC | Altitude | 3Al(2 battery temp,1 ambient temp).2 RS485,7 D |
Efficiency | >96% | Signal input | 6 dry contact |
Rated Power | 3000W(176 to 290VAC | Communication Port | RS485,SNMP |
Working Temperature | -10℃to+75℃(fully output below 55℃) | Display Mode | LCD |
System | Environment | ||
Cooling Mode | Natural cooling | Operating Temperature | 10℃ to +55℃ |
Cabling Mode | Top inlet and top outlet | Storage Temperature | 40℃ to+75℃ |
Maintenance Mode | Front maintenance | Operating Humidity | 5%to 95%(non-condensing) |
Protection Level | IP20 | Altitude | 0 to 4000m(if the altitude is within the range of 3000m to 4000m,the maximum operating temperature decreases by 1℃ as the altitude increases by 200m) |
Product Feature
1) The rectifier module adopts active power factor compensation technology, and the power factor value reaches 0.99.
2) The normal working range of AC input voltage is wide to 90~290V, Single Phase, (323V~480V ac, 3 Phase).
3) The rectifier module adopts full-bridge soft-switching technology, and the efficiency is up to 96%.
4) Smart battery management. There are load power-off and battery low-voltage protection (LVLD+LVBD) and secondary power-off (secondary power switch) functions, which can realize functions such as temperature compensation, automatic equalization and floating charge control, automatic voltage regulation, battery capacity calculation, and online battery testing.
5) The rectifier module adopts non-damage hot-swappable technology, plug and play, and the replacement time is less than 1min.
6) Networked design, providing multiple communication interfaces (such as RS485, dry contact), flexible networking, real-limited local and remote monitoring, unattended.
7) Lightning protection design for AC and DC sides, suitable for thunderstorm areas.
8) Support fault protection and fault alarm functions.
9) Friendly operation and maintenance can be installed against the wall, effectively saving space.
10) Ultra low radiation. Adopt advanced electromagnetic compatibility design.
3. Rectifier system pictures:
Tianjin Estel Electronic Science and Technology Co.,Ltd
Introduction
Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.
The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.
Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.
“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.
Company Capability
Trade & Market
Main Markets | Total Revenue (%) |
Domestic Market | 50.00% |
Africa | 15.00% |
Southeast Asia | 10.00% |
South America | 5.00% |
Central America | 5.00% |
Australia | 3.00% |
Mid East | 3.00% |
North America | 2.00% |
Southern Europe | 2.00% |
Eastern Europe | 1.50% |
Northern Europe | 1.00% |
Western Europe | 1.00% |
South Asia | 1.00% |
Eastern Asia | 0.50% |