
2.4 Ghz Wifi Antenna 3 Dbi ceiling moung wifi indoor antenna
SPECIFICATION
Size: 166*96MM
Frequency 2400~2483.5 MHz
Band Width 100 MHz
Impendence 50 ohm
V.S.W.R 2.0 : 1
Gain 3 dBi
Input Impedcion 50 W
Polarization Type Vertical or Horizontal
Working Temp -40ºC~+85ºC
Humidity 55%~75%RH
Radome material: ABS
ITEM | Specifications | |
Antenna | Frequency Range | 2400~2483.5 MHz |
Band width | 83.5 MHZ | |
Polarization | Linear | |
Gain | 2 dBi (Zenith) | |
V.S.W.R(min) | < 2.0 | |
Impendance | 50 Ω | |
Mechanical | Cable | RG58 or RG174 |
Connector | N type,SMAor others | |
Mounting Method | Screw | |
Environmental | Operating Temperature | -40ºC ~+85ºC |
Vibration | 10 to 55 Hz with 1.5mm amplitude 2 hours | |
Environmentally friendly | ROHS Compliant |
1 Electrical Characteristics
Form 1
No. | Item | Specifications |
1 | Frequency(MHz) | 2400~2500 MHz |
2 | V.S.W.R(in BW) | ≤2.0:1 |
3 | Gain(Zenith) | 3dBi |
4 | Polarization | Vertical |
5 | Impedance | 50 Ω |
1.2 Mechanical
Form 2
No. | Item | Specification |
1 | Cable | — |
2 | Connector | SMA |
3 | Plastic Housing | White |
2 Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25±3°C
Relative Humidity range 55~75%RH
Operating Temperature range -40°C~+85°C
Storage Temperature range -40°C~+100°C
4.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
4.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.
4.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.
4.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
Click here to find the data sheet:
Antenna display:
Our Antenna :
---Powerful R&D team
---Wonderful design solution
---Perfect after-sales service
---Strict quality testing
---Rich cooperation experiences with Communication product manufactures
---Competitive price
FAQ
1. What's the Warranty of the Products?
Answer: In general, all goods with 12 month-warranty after the shipments .
2. How about the defective rate ?
Answer: Less than 1%.
3. Where can customers get the Product Specification and other datasheets?
Answer: we will send them via email once get the request from the customers.
Our high quality products , competitive price and professional service, be sure to meet your need for all kinds of components. ^_^
you are welcome to visit our website to learn more information of our productions:
www.topelecind.com
TOP Electronic Industry Co., Ltd.
Thank you for your time to know our company and lean our production.
TOP Electronic Industry co., Ltd was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.
Here we can offer one-stop solution service: from PCB design, production to PCB assembly, from a series of components offer to the BOM list.
In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate inventory, fast delivery, be praised by all the customers .
As an innovative company, TOP supplies and markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability, accessibility are all important to us.
The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.
Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc
As a global distributor of electronic components, we stocking the world's widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material) purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.
With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.
TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.
As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.
You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!