ISO 6533 Clause 7 Figure 3 / 4 / 5 For Testing Forestry Machinery Portable Chain - Saw Front Hand - Guard

ISO 6533 Figure 3 / 4 / 5 for Testing Forestry machinery Portable chain-saw front hand-guard

6.2 When the machine is designed in such a way that a type A gauge of 100 mm length cannot be inserted
between the handle and the housing, and X0 cannot be determined using such a gauge, the gauge length
can be shortened (though no more than necessary). Using this modified gauge, X0 shall be determined
according to all other requirements of 6.1.

6.3 If no contact between the gauge, the housing and the front handle can be achieved, then X0 shall be
determined as the intersection point, transposed to the front handle along the line of sight, between the
upper right edge of the type A gauge and a virtual surface that is created by a line of sight, parallel to the
guide bar centre line, following the right inner surface contour of the front handle (see Figure 3)

Key
1 type A gauge
2 type A gauge centreline
3 guide bar
4 chain saw body
5 front handle

Figure 3 — Definition of reference point X0 when there is no contact between the gauge and
the front handle

7 Front hand-guard dimensions
7.1 Front hand-guard width, W1
The front hand-guard width, W1, is the distance from X0, left, to the point at which the requirement for the
front hand-guard height over the front handle, H1 and H1A, respectively (see 7.2), is not fulfilled. See Figure 4.
The front hand-guard width, W1, shall in both cases (H1 and H1A) be at least 100 mm.

Figure 4 — Front hand-guard width, W1, from the rear view of the machine

7.2 Front hand-guard height over front handle, H1 and H1A
The measurement of the vertical height H1 and H1A shall be made in a plane parallel to the guide bar
plane and perpendicular to the guide bar centreline (see Figure 5).
Any free play in the guide bar fixing shall be taken up by tightening the guide bar to the saw body in its
uppermost position.
The height, H1, above top of front handle shall be at least 20 mm.
When the front hand-guard also activates the chain brake, this height shall be at least
— 20 mm with disengaged chain brake (H1), and
— 0 mm for engaged chain brake (H1A).

Key
1 intersection point
2 unprotected part of saw chain
Figure 6 — Line between X0 and rearmost part of unprotected saw chain

Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cost and enhance enterprise’s international competitiveness.

Kingpo is accredited by International Electrotechnical Commission(IEC) and becomes a nominated supplier and is officially issued a CBTL certificate.We are now among the world’s leading laboratory testing equipment manufacturer to produce the highest level and more standard testing equipment for global Electrotechnics labs becoming nominated supplier of NEMKO,UL,PHILIPS,CTK,CVC(Vkan Certification & Testing Co.,Ltd),Dongguan Quality Testing,China Household Electric Appliance Research Institute,Russia National Standard Institute,Belarus National Standard Institute,Korea National Standard Institute,etc.Lamp cap gauges and testing equipments produced by Kingpo,which are calibrated by CNAS and ilac-MRA ,have a high international reputation.

Kingpo aims at manufacturing world class testing equipment for Chinese labs,establishing an independent R&D center and introducing foreign state-of-the-art technology and international high-tech talents.Adopting a creative design concept,taking sensor data acquisition as forerunner,computer control technology as lead,imported transmission device with high accuracy and low noises,we have developed more than one hundred and sixty products.

Lab software Lims system　

Material combustibility testing equipment　

ELectric tool testing equipment

Plug and socket testing equipment

Switch service life testing equipment　　　

Electrical accessories testing equipment

Luminaire testing equipment　　

Household appliances testing equipment　　　

Anti water spray testing equipment

Wire and cable testing equipment

IT product testing equipment　　　　

Battery testing equipment

Kingpo’s domestic customers include Entry-Exit Inspection and Quarantine Bureau, Bureau of Technical Supervision,Product Quality Supervision and Inspection Institute,UL Lab(Underwriter Laboratories),TUV Rheinland,SGS and other electronic manufacturer.Our products are exported to international market and have also established distributorships in HK,Vietnam,Singapore,Thailand,Iran,India,

Africa,New Zealand,Australia ,Germany and so on.

Service is an essential factor to improve enterprise’s competitiveness.Therefore,Kingpo has always made every effort in improve service level and service value.Before sale,we have professional engineering team to provide customers with comprehensive consultant and customized service.After sale,we have after-sale team to offer customer timely and satisfying technical support and product maintenance.

By means of excellent product competitiveness and complete service,our company has won numerous customers high praise and sincere trust.In complying with technical improvement and increased efficiency and quality assurance of these products ,we insist on providing high end products to market and dedicating to being a leader in testing equipment industry.