
FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is easy to operate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation.FTTX Enclosure not only used in FTTH field, but also used in FTTA or other harsh environment.
Application
FTTH field
Traditional solution use ONU or FDH (Optical Network Unit/Fiber
Distribution Hub), when trunk optical cable arrives to outside of mansions and villas. FTTX Enclosure can replace ONU or FDH
because it has fiber distribution function. Inside, it can be fixed
2-4pcs 1*8 or 1*16 PLC, and can be put 24pcs fiber splice
protection sleeves. After mating with 1-48F IP67 preassembled
waterproof connector, FTTX Enclosure can connect each mansion and
villa or low voltage silo directly. It can be fixed outside of
mansions and villas, or holding pole installation. FTTX Enclosure
can reduce signal loss through less connecting node. For in factory
preassembled FTTX Enclosure, it’s no need high skill operator
because of no fiber splice operation. Installation efficiency can
be increased by 40%.
FTTA field
Traditionally, Remote Radio Unit (RRU) and Building Base band Unit
(BBU) connected by optical fiber cable, forme star network
technology. Each RRU need one duplex outdoor cable link to BBU.
Installation will need more time and cost will be high.FTTX
Enclosure work as an Aggregation/Demark box, link RRU and BBU
together. From BBU to FTTX Enclosure, only need one multi-fiber
hybrid cable. Then FTTX Enclosure divide fibers to each RRU through
IP67 preassembled waterproof cable assemblies. RRU can get power
through assembled power connector on FTTX Enclosure.It can avoid
needless duplication.
Trunk Cable Connecting
Trunk cable needs to be fusion welded frequently because of each
drum cable length limited. So connecting point is weak and need to
be protected very well. When trunk cable comes into FTTX Enclosure,
it will be sealed and fixed by torsion proof cable gland (plastic
or metal type). For 5mm-14mm out diameter cable,FTTX Enclosure has
different accessories to fit. Torsion gland can release stress when
trunk cable bending and protect fiber avoid breaking. Inside of the
FTTX Enclosure, main cable and strength member were fixed by
fastener, which make sure the box can stand 1200N pulling force
long term. Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs)
can be fixed on the body, which make FTTX Enclosure fiber divided
very easy. Anti-skid design on the base case, which makes sure FTTX
Enclosure holds wire/pole firmly.
Features and Benefits
*High compatibility: can be assembled ODVA, Hconn, Mini SC, ODC,
PTLC, PTMPO or power adapter.
*Factory-sealed or field assembly.
*Strong enough: working under 1200N pulling force long term.
*From 2 to 12 ports for single or multifiber harsh connectors.
*Available with PLC or splice sleeve for fiber divide .
*IP68 waterproof rating.
*Wall-mounting, aerial installation or holding pole installation.
* Decreased angle surface and height make sure no connector
interfering when operating.
*Meet IEC 61753-1 standard.
*Cost effective: save 40% operating time.
SHENZHEN DYS FIBER OPTIC TECHNOLOGY CO.,LTD
Shenzhen DYS Fiber Optic Technology is a leading company in developing and manufacturing advanced fiber optic products,mainly offer fiber optic indoor and outdoor cable, CPRI waterproof jumper, MPO/MTP jumper , standard fiber optic jumper and PLC Splitter. DYS win the the honorary title of National High-tech enterprise by Shenzhen government in 2014.
![]() | ![]() | ![]() |
TEAM | STRENGTH | CERTIFICATE |
About 200 well-trained | Factory over 3500 square meters and has more than 23 non dust productions lines in total | ISO9001:2008,RoSH, CE,High and New Tech EnterpriseCertficate. |
With years of experiences in the fiber optic industry, our factory is fully equipped over 3500 square meters and more than 32 non dust production lines .About 200 well-trained staff and engineers are contributing to our proud products. We have 4 production lines for fiber optic cable, 2 high standard MPO/MTP jumper assembly lines, 8 production lines for standard jumper and 10 PLC Splitter production lines.
The most advanced imported polishing equipment and testing instruments enable our products have super quality, such as Senko polishing machine, interferometer, automatic cleaning machine and OTDR ,JGR and so on.
All of our optical products are RoHS compliant and DYS also obtained ISO9001, ISO14001 certification. Our high quality products and outstanding service win the customer from all the world, DYS fiber optic is looking forward to cooperate with you.
Enterprise Vision:
To win customers and win the future, we are committed to developing into a product and technology leader in the optical communications industry.
Innovation-Driven Development:
The company has a rigorous and capable research and development team and rich production experience, supplemented by the scientific management system, through years of accumulation and has a perfect product independent development and innovation ability, with a number of new product patents.
Quality Policy:
Quality is the first and credit is the most important. Management is the foundation and service is sincerity.