
200W 300W 400W 500W Single ended heating resistance rod Cartridge Heater with thermocouple K
Description:
1) Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas).
2) Cartridge heater is Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc they are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands..
3) Cartridge heaters are used for several heating metal parts and can be fitted with threaded bushings for liquid heating for certain applications. cartridge heaters will reach metal temperatures of up to 760°C with the appropriate material, watt density, and fit selections .
Specification:
Part temperatures up to 1400°F ( 760° C ) on alloy 800 sheath
Watt densities up to 40W/cm2
Maximum voltage up to 480VAC, Minimum voltage up to 5VAC
Minimum diameter up to 3mm
Maximum diameter up to 35mm
Technical Detail:
1 Tube diameter: Φ3mm-Φ30mm
2 Tube Material:SS304;SS316,SS321,NICOLOY800 etc
3 Insulation Material:High-purity Mgo
4 Reisistance wire element:Ni-Cr or FeCr
5 Lead Connection Option: Crimped or Swaged leads
6 Lead and type of connection leads, 10" Fiberglass Standard(Wire
options,silicone high temperature frberglass).
Sheath material | SS304.321.316L,Incoloy800.840,Titanium |
Insulation material | High-purity MgO |
Resistance | Ni-Cr or FeCr |
Maximum voltage | 480VAC |
Wattage density | high/middle/low(5-40w/cm2) |
Wattage tolerances | toloerance :+5% -10% |
Dimensional | Diameter: Min. dia:3mm |
Length: | Customized |
Lead options | Crimped- on / Swaged- in |
Lead types | Swage fiberglass insulation nickel wire ( 750°C ) |
Crimp line ( 250°C ) Crimp | |
silicon insulated wire ( 200°C ) | |
Crimp fiberglass insulation nickel wire ( 450°C ) | |
Internal | Type J or K available thermocouple |
Lead protection options | Stainless steel braid |
Stainless steel flexible hose | |
other options | Bent heaters, in no-heat section, up to 90° angle |
mounting flange |
Wuhan Global Metal Engineering Co., Ltd
Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995.
Our main products include but not limited to Coil heater, Cartridge heater, Flexible Tubular heater, Cast-in Heater, Band heater, Thermocouple, RTD’s, Thermocouple extension wire, Thermocouple connection head , Mineral Insulated thermocouple cables , thermowell, etc.
After 20 years growth, we have more than 200 employees in the factory including 50 sophisticated technicians. Our products have been exported to many countries including North America, South America, Europe, Middle East ,South Asia, etc.
More details, you can also visit our website: https://www.gmemetal.com