China Categories
All Categories
3 Working Station Cable Testing Equipment ， Electric Wire Abrasion Test Apparatus
Ask Latest Price
Brand Name:HongCe
Model Number:HDX1304
Certification:Calibration certificate(cost additional)
Price:Negotiation
Payment Terms:L/C, T/T
Supply Ability:10 sets per month
Delivery Time:30 days
Company Data
Verified Supplier
Contact Person
Tessa Huang
Business Type:
Manufacturer
Officials:
No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Products Introduction:
This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
It is used for checking the wear resistance test of the completed flexible cables.
Technical Parameters:
| Power supply | AC230V 50Hz |
| Fixed shaft diameter | Φ40±0.3mm |
| Test rate | Single strokes 40±1 times/minute |
| Test stroke | 0.1mm up-and-down movement |
| Working station | 3 |
| Weight | 500±5g*3 |
| Counter | 0~999999 (can be preset) |
| Dimension | 1200×400×1400 (mm) |
Test method:
1. This test shall be made on three pairs of samples of flexible cable, each sample having a length of about 1m.
2. In each pair one sample shall be wound so as to give nearly two turns on a fixed reel having a diameter of 40mm at the bottom of the groove as shown in figure 3, the distance between the flanges of the reel being such that the turns are in close contact with each other. The sample shall then be fixed to prevent any movement relative to the reel.
3. The other sample shall be placed in the groove formed by the turns and a weight having a mass of 500g shall be attached to one end.
4. The other end shall be moved up and down over a distance of 0.1m, at a rate of about 40 single strokes per minute.
Panel function:
[Speed regulation]: Adjust the motor speed, that is, adjust the movement speed of the movable clamp.
[Stop]: Press this button to stop the test.
[Start]: Press this button to start the test.
[Power]: Turn on and off the working power of this machine.
Note:
1. After the end of use, reset the movable clamp and turn off the power. Always refuel the screw section and keep it lubricated. Do not place metal and hard objects on the equipment casing.
2. The equipment should be inspected regularly and the loose screws and nuts should be tightened to ensure the good operation of the equipment.
3. Work environment must be clean, please keep away from corrosive items.
Company Profile
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.
Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.
HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.
HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.
Send your message to this supplier
You May Like
IEC60245-1 Cable Testing Equipment For Resistance To Heat Of Tectile Braids Test Temperature From RT To 300 ° C
3000W Mineral Oil Immersion Test Apparatus Six Groups Working Stations
Three Stations IEC60811-1-4 Cable Testing Equipment
Manual Operation Cold Bend Test Apparatus For Cables External Diameter Less Than 12.5mm
IEC60811-1-2 Cable Rubber Insulation Materials 4000cm3 Air Bomb Oxygen Aging Tester
1000mm 0.33m/s Flexible Cable Testing Equipment IEC60245-1
Metallic Power Cord Tension Torque Tester Electrical Cable Pull Twist Testing Equipment IEC60335-1:25.15
60Hz Plug Cord Cable Testing Equipment Flexing Rate 10~60 Times / Min
750W 150 litre Cable Testing Equipment Low Temperature Test Chamber IEC540
IEC60811 High Temperature Indentation Device With Stainless Steel Support
UL1581-1990 Cable Testing Equipment / Wire Cable Spark Tester
Inquiry Cart
0