Ultra Thin Indoor Hdtv Antenna 10ft Coaxial Cable , Gain 3dbi Hd Digital Antenna

HDTV Antenna ,Ultra-thin Digital Indoor TV Antenna 25miles Reception Range with 10ft coaxial cable ,Gain 3dBi ,Free local channels for life

Product description

• Receive free TV stations - no longer pay for expensive cable or satellite! HDTV antennas can receive local TV programs, e.g ABC, CBS, FOX, NBC, PBS, etc. And receive local news,weather forecast,and educational programs that satellite and cable don’t offer.
• Install anywhere,25miles Ultra-thin Digital Indoor TV Antenna allows you to place anywhere,include windows, bookshelf ,television,wall and table etc.
• Easy installation :Fast and easy set up with 3 step-unwrap,plug it and scan channels.
• Light as a paper,the antenna item weight 80g,easy for you to move.

Easy set up instructions

1)connect the end F-female/IEC of the attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner.
2)Mount the antenna (with the sticker attached).
3)In the TV’s setup menu.Set the TV to “scan”for channels.This can sometimes be listed as auto-scan,channel search or channel scan.consult the TV manual for detailed instruction.
4)If reception is sporadic, try moving the antenna to another location and rescaning the TV tuner until optimal position is found.

Specifications :

Working frequency :VHF 174~240MHz,UHF470~862MHz
Gain:3dBi
Reception Range:25miles
Connector Type:F Male/IEC
Impedance:75Ω

NOTE:

1.Placing the antenna higher or close to window may result in better reception.you must rescan whenever you move the antenna.
2.If you use a flat HDTV,please go through your TV manual to make sure your TV is with built-in tuner for free view.
3.Make sure you are using a HD receiver:otherwise no HD channel can be picked up.please read receiver manual.
4.You should retune your free view TV’s and digital receiver from time to time to ensure you are receiving all available services.Returning only a few minutes and can be done with your remove control.
5.TV reception depends on the distance from your home to the transmitting tower and the surrounding environments.

How to use amplifier

1. Suitable for HD TV with HDTV tuner, connect the antenna directly to HDTV with a amplifier.
2. Suitable for TV with extra converter box, Connect the antenna amplifier to digital converter box, and connect digital converter box with your TV .
3. Scan for channels and access all your favorite local and national programming completely for Free!

Please Note

1.For flatscreen HDTVs, please check the TV's manual to make sure the TV has a built-in tuner for receiving over-the-air broadcast, and make sure this tuner can receive HD signals or else it will not be able to receive and watch HD channels.
2. Keep the digital antennas away from the sources of interference, keep the hd antenna away from those big power consumption devices, such as air conditioner, elevator, hair dryer and microwave oven etc.
3.Place the antenna tv near windows for best results. antenna signal strength can vary depending on distance from the tower, terrain, and weather. Reposition the antenna in a different location if needed. Always re-scan channels after moving the hdtv antenna indoor, the result may be better.
4.Our TV antenna currently only support AV cable and coaxial cable, if your TV have not them, You need to buy "AV to HDMI Adapter" or "Coaxial Cable to HDMI converter".

If your Indoor TV antenna is not working as expected, try the following tips

25-35 Mile Range From TV towers - control amplifier booster turn to the short range yellow light on!
35-50 Mile Range From TV towers - control amplifier booster turn to the long range green light on!

1. Check to make sure you have correctly connected the hd antenna to your HDTV or third-party HD receiver.
2. Re-scan for channels: In the TV's setup menu, set the mode to hdtv antenna or air. Refer to the TV manual for detailed instructions.
3.Signal quality determines the picture quality and how many channels you can receive. Once you receive the antenna, hook it up to your TV, and try moving it around your home to find the placement with the best signal. You might be surprised how many HD channels you can receive!

Dongguan Boges Communication Technology Co., Ltd

Boges is a professional company in the design, manufacture and distribution of various high quality antennas and RF cable for wireless AP, mobile phone and industrial applications; We are the professional supplier of communication and RF connection products for over 4 years, our corporate mission is leading the market to develop and manufacture the new generation wireless antennas and RF connection products offering the best value for booming new communication industry.

Boges has been a main supplier in wireless antenna and RF products for worldwide customers. A more than 4000 square meter building located in China and high levels of facility have been invested in order to establish a strong R&D and manufacturing abilities to meet the customer requirement. Boges is ISO9001:2000 certified for high quality management, all the products are made in house; our manufacturing facility is capable of quick turnaround of short run and volume production requirement in a controlled planning and logistics system. We are confidently assure that for the most types of antenna will be designed and produced by Boges that are all competitive enough in aspect of quality, reliability and price-effective to rise the value of our customer’s products.

DingYi was established in 2017,  associate factory of Boges , which is a professional manufacturer specilized on antennas , RF connectors and cable assemblies , located in Dongguan with 5 ,800 sqm building area . and potentially holds more than 200 people to work ,  it can provide one-stop servies from developing , designing , manufacturing and marketing . Presently , the company has equipped with complete set of brand - new and advanced machines exclusive for manufacturing products .