Power over ethernet POE Industrial Ethernet Switch 100/1000Base SFP Fiber Ports

Power over ethernet POE Industrial Ethernet Switch 100/1000Base SFP Fiber Ports

Introduction

OFS-PE-MIGSF2T4 PoE+ network is Gigabit Ethernet switch, with 4 compatible 10/100/1000BaseT (X), 802.3af (PoE) and 802.3at (PoE+) and 2 Gigabit Ethernet port SFP port. Each PoE+ port can provide 30W power supply, the highest output 36W to the receiving equipment, such as IP camera, high-performance wireless AP and industrial grade IP phone. Support for a variety of management functions, including ERPS, STP/RSTP, PoE power management, PoE device automatic detection, PoE power supply troubleshooting, PoE diagnosis, IGMP, VLAN, QoS, bandwidth management and port mirroring. Designed specifically for severe outdoor applications, the 4KV OFS-PE-MIGSF2T4 surge protection can be adapted to harsh outdoor environments to ensure uninterrupted power supply for PoE systems.

Characteristic

Built in 4 PoE+ Ethernet port, compatible with IEEE 802.3af/at standard

Each PoE+ port supplies up to 36 W

Support for port based PoE management, effective monitoring of electrical equipment

4KV Ethernet port surge protection for harsh outdoor environment

Full load working in -40 ºC~ 85 ºC temperature

Advanced PoE management functions (Port Based PoE management, power distribution, PD fault detection)

• support rich management features, support SNMP V2C, CLI command line, Web network management, TELNET, make equipment management more convenient

• support port aggregation and improve the reliability of the link through multi link backup

• support ACL control strategy, support L2 (Layer2) - L4 (Layer4) packet filtering function to protect network security

• support rich QoS strategy to provide flexible flow classification and queue scheduling algorithm

• support Port-based VLAN, IEEE 802.1Q VLAN, simple network planning

• support G.8032 (ERPS) standard Ethernet ring protection technology, recovery time <20ms

• support IGMP Snooping to prevent multicast network flooding, effectively saving multicast network bandwidth

- support DHCP Snooping, to prevent the illegal DHCP servers, improve network security

• support LLDP protocol, can quickly find two layer network topology information and topology change information, simplify network management

• support 802.3x flow control, can provide lossless Ethernet Service

• support SPAN mirror function, you can monitor the network traffic in order to detect and troubleshoot network

• support broadcast storm suppression function, prevent excessive broadcast, multicast data flooding in the network, enhance network robustness

Safety certification:

Safety:GB4943-2011

EMC:GB9254-2008

EMS:

ESD (IEC 61000-4-2) Level 4 (8K/15K)

RS (IEC 61000-4-3) Level 3 (10V/m)

EFT (IEC 61000-4-4) Level 3 (1V/2V)

CS (IEC 61000-4-6) Level 3 (10V/m)

PFMF (IEC 61000-4-8)Level4(30A/m)

Surge (IEC 61000-4-5) Power Port: ±2kV/DM, ±4kV/CM;

Data Port: ±2kV/DM, ±4kV/CM

L2 Agreement:

G.8032 (ERPS),IEEE802.3,IEEE802.3u,IEEE802.3z ,IEEE802.3x,IEEE802.3ad,IEEE802.1p,IEEE802.1x,IEEE802.3ab,IEEE802.1Q,IGMP Snooping

Specifications

PortS:

Fiber Ports:100/1000Base SFP

RJ45:10/100/1000Base(TX) MDIX

POE:V+,V+,V-,V- Corresponding pin 1,2,3,6(Endspan MDI Alternative A)

Console:RS232,Phoenix 6

LED:P1, P2,1000M LINK,10/100/1000 ACTIVE, SFP LINK/ACTIVE

Exchange attribute:

Priority queue: 8

VLAN number: 4K

MAC address table: 16K

Package buffer: 8Mbit

Packet forwarding rate: 26.7Mbps

Exchange delay: <10us

Power:

Input voltage: PoE (+):48 (46 ~ 57 V) VDC, dual redundant input

Non PoE:10-60 VDC, dual redundant input

Power consumption: motherboard power consumption 6W, PoE maximum power consumption 62W

Over current protection: support

Connection: Phoenix 6 core socket

Reverse protection: support

Mechanical properties:

Environmental Science:

Storage temperature: -40 degrees ºC to 85 ºC

Storage humidity: 5% to 90% RH

Working temperature: -40 ºC to 85 ºC

Working humidity: 10% to 90% RH

Ordering Information

Company introduction

Shenzhen Optfocus Technology Co.,Ltd was established in 2009, which is a High -tech manufacturer enterprise with 10 years’ experience in global sales and services.

Our company focus on professional R & D, production and sales of xPON access equipments ，FTTH/FTTx solution and passive cabling system products. We also committed to provide Customized OEM & ODM services to Global communication distributors, Telecom Operators and System Integrator.

OPTFOCUS manufacturing center covering area around 2,500 M², and owning three production workshops, 9 production lines.

Our high quality products and outstanding service will help you win more market and customers.

Join us to make Win-Win business,looking forward having cooperation with you!

Advantage of OPTFOCUS:

• ①National High-tech enterprise certification；

  ②Fiber Optical Innovative &production team Over 10 years;

  ③Fiber optical active and passive components production Workshop;

  ④Strict quality management system;

  ⑤Professional One stop supply & service;

  ⑥OEM&ODM available;

  ⑦Reliable and Timely customer services;