Long Ben OEM Injection Molding Tools 1 Cavity Mold Parts Export To Germany

Quick Detail:

1. Part Name: Long ben

2. Plastic Material: PA66

3. Cavity Material: 1.2344 HRC48-52

4. Mold Life: 1000K shots or according to customers quantity condition to make it, then will save the cost for our customer.

5. Gate Type: Point Gate, Sub Gate, Side Gate, Valve Gate, Edge Gate, Tip Gate etc, the gate will according to the part structure and customer’s requirement.

6. Mold Base Standard: HASCO, DME, LKM local standard, and will according to customer’s requirements.

7. Standard of Mold Accessories: LKM, DME, HASCO, MISUMI, MEUSBURGER.

8. Hot Runner: YUDO, MOLDMASTER, HUSKY, INCORE, HRS, PETS etc, and will according to customer’s requirements.

9. Hydraulic Cylinder: MERKER or Chinese local brand etc, and will according to customer’s requirements.

10. Design Software: UG, CAD, Moldflow etc.

11. Machine: From 30T to 250T, total 25 sets machine.

12. Payment: T/T, to be negotiated.

13. Packaging: Wooden case with steel frame.

14. Mold Logo: Based on customer’s requirements.

15. After Sales Service: One year warranty.

Description:

The Part Name: Long ben

Mold type: Plastic injection mold with cold runner.

Part Material: PA66

Locating Ring Dimension: φ100

KO Pattern: 200*200mm

Sprue Radius: SR10.5

Ejection Type: Ejection pins, ejection sleeves.

Mold Construction Description: Cold runner with sub gate, 2 plate mold with sliders, lifters, inserts, and shut off area.

This procut is made of PA66 plastic material and it is one of the components of the reputation brand electronic parts. The mold construction is complicated and there are many inserts, sliders, lifters and ejector pins, so it has a very high technical requirement for mold design. The mold is a cold runner mold with the best water cooling system and the part can be molded by automatically.

This part has very high size requirements, the defect showed below will not be acceptable, for example, weld line, dark spot , sliver marks, gas traps effect, visible ejection marks, deformation, short shot filling, burnt streaks, sink marks, flash, over dimension, under dimension, street crack etc, moreover, the product finishing surface must meet the requirements of MT11010.

If the mold choose the hot runner, the mold key advantages showed below:

1. Clamping pressure can be lower

2. Cooling time is faster

3. Cycle time is faster

4. Energy consumption lowered

5. Injection pressure can be lower

6. Injection process is cleaner

7. Injection gate are on better locations

8. Labor costs for removing the part from the mold and separating runner scrap from the part are eliminated.

9. Output increased

10. Overall profitability increased

11. Possibility of contamination is lessened with no runners

12. Possibility of producing the parts using small injection machines

13. Problems on nozzle freeze or sprue sticking are eliminated

14. Production costs are lowered

15. Production steps are shortened

16.quality of the plastic part is better

17. Regrinding is eliminated

18. Resin costs are lowered

19. Runner scrap eliminated or reduced

20. Runner weight reduces shot size

Specifications:

How to pack the mould:

1. Check the mould component

2. Cleaning mould cavity / core and spread slushing oil on the mould

3. Cleaning mould surface and spread slushing oil on the mould surface

4. Put into the wooden case

Contact information:

Sky Liu

M: +86 135 3741 3465

T: +86 769 8533 1232 ext 811

F: +86 769 8547 3349

Skype: sky.liu18

E: sky@forwa-mould.com

After sale service:

During mould manufacturing, we will offer update mould report with picture every week.

We will send video and photos to customers during mould test,

Send customer packing video and photos before mould delivery.

If mould stay in our factory for production, life warranty.

One year warranty, all maintenance are free of charge during warranty.

Being the leading plastic mold maker in China, Forwa has been actively and sincerely striving to improve itself. And we have been doing a good job in mold making and plastic parts manufacturing and have much to its credit.

Assembling of manufacturing, design, engineering and marketing, our company has engaged ourselves in the field of mold making and plastic part molding and won the title of the ISO9001:2000 certificated corporation which has introduced the 5S system into the management. In order to fulfill the requirements of different clients correctly and effectively, we built up a special team called cost and technology team to do the DFM (design for manufacture) to customers for each project.

Now, our products, including various components of automobile, electron, computer peripheral, house application, industrial application and medical application, have been sold all over the world and win the favorable comment from the customers.

Being the professional in this line with adequate fund, we have various advanced facilities in house most of them are imported from Japan, Germany, and the USA. In order to keep all of our staffs to be stable and well-educated, we devote a lot into the education and training, especially for the engineers and technicians. Therefore, all of them are always proficient in operating the updated machines introduced by the company.

Our honorific customer

Forwa has gone from strength to strength by improving good quality and excellent service as well as client' reliability.

Forwa pays much more attention to technician training and corporate culture development.
Forwa will be your best partner and always with you to create briliant tomorrow.