
1-Pair Drop Wire (STB) Module Without Protection is a copper pair connector specifically designed to fit onto 35mm DIN rails, It is designed to connect 2 copper pairs and has common features such as:
1. Water proof, sealed IDC termination
2. Disconnection and testing facilities
3. Tooless termination
4. 5 point protection plug with 1×3-pole GDT 230V 5A/5KA and 2×PTCRs in
Range of the section: | diameter 0,4… 1,2 mm |
Diameter on the isolation: | it is maximal 5 mm |
The current-response characteristics: | 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance | |
“Dry” atmosphere: | > 10 12 Ohm |
“Moist” atmosphere (standard ASTM Of d618, procedure F): | > 10 12 Om |
Salt fog: (standard ASTM Of b117) | > 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) | > 10 10 0m |
The contact resistance | |
R of material + R of the contact cross connection + by R of the contact connection of the wires | < 10 m |
Increase in the contact resistance | |
After climatic testings: | <2,5 m |
After 50 connections - turning offs: | <2,5 m |
Dielectric strength: | >3 kV of direct current during 1 minute |
Mechanical characteristics
Screw of the connection of the pair of the distributive wire: | Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection | Transparent polycarbonate |
the distributive wire: Housing: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Fitted contacts: | Tinplated phosphor bronze |
Contacts of the grounding: | Alloy Cu - Zn - Ni - Ag |
Contacts of the connection: | Tinplated solid bronze |
Sealing material before the lower part: | The epoxy resin |
Sealing material before the upper cable part: | Silicon compound |
Cover of the pair of the distributive wire: | Polycarbonate |
Housing of the insertable module: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Sealing material of the insertable module: | Gel |
The ring gasket: | Elastomer EPDM |
Spring: | the stainless steel |
Cable laying is the distributive wire: | Thermoplastic rubber |
Cixi Anshi Communication Equipment Co.,Ltd
Over 30 Years of Experience
Cixi Anshi Communication Equipment has been specializing in jacks
and connectors since 1986. We offer you more than 200
specifications in 10 categories, including fiber-optic distribution
trays and splice closures, drop wire connectors, Cat5E and Cat6E
patch cables, internet connectors, and distribution boxes. About
60% of our products are exported to Southeast Asia, Europe, the
Middle East, Africa and the US.
One New Product Every Month
Our six R&D staff members use advanced testing equipment from
the US. They use computer software such as AutoCAD, Pro/E, 3D MAX
and Photoshop. They also develop one new product every month to
meet your requirements.
OEM/ODM Orders Accepted
Now, we have more than 100 staff members and 20 of them are
technicians at our 4,800 sqm factory. We have two production lines
dedicated to processing your OEM/ODM orders, thus, we produce
$200,000 worth of components every month.
Three Sections to Control Quality
Following ISO 9001:2000 guidelines, our quality control department
includes QC, QE and QA sections. QA staff members check the quality
of all raw and processed materials, while QE personnel are
responsible for the related documents. QC staff members handle your
requests and quality statistics, and make the corresponding
improvements. We use materials from South Korea, the US and Taiwan
to ensure quality. You can have confidence in ordering our
CE-approved products.
Contact Us Today
Call us today for more information.