
Features:
1) Temperature: -5 - 40°C
2) Relative humidity: <85% (+30°C)
3) Atmospheric pressure: 70 106KPa
4) Material: stainless steel and cuprum, cuprum gold plating over
nickel
5) Performance of anti-burn: PPT (UL94V-0) or anti-burn ABS
(UL94V-0),
combustibility of GB/T 5169.7-1985 standard
6) Construction features: adopts modularization design, elegant
outlook and high endurance
7) Pulling-out force: tin bronze and silver plating (20 - 40uinch),
pulling-out
force not less than 25N
8) Intermediate resistance between reed terminators: no more than
7m
(ohm between intermediate reeds under standard examination
condition)
9) Intermediate resistance: no more than 3m ohm under standard
examination condition
10) Performance impedance: 120Ω (balance)
11) Work rate: 2mb/s
12) Insulation resistance: 1,000mΩ / 500V (DC)
13) Resistance to voltage: no breakdown or arc for 1 minute under
1kV (DC)
14) Crosstalk ratio: ≥60dB (50kHz - 210MHz)
15) Plug-in loss: ≤0.4dB (50kHz - 210MHz)
16) Back wave loss: ≥18dB (50kHz - 210MHz)
17) Life: 200 cycles
Specification:
Mechanical Performance | Insertion force : 40~75N |
Pull Out Force : F≥25N(axial) F≥7.5N(radial) | |
IDC Life : 200 times(20-26 AWG Solid wire) minimum | |
Copper Conductor Diameter: Φ0.4~Φ0.8(mm) | |
Environment Characteristic | Storage Tempreture: 40 to 70°C |
Operating Temperature : 10 to 60°C | |
Relative Humidity: 95%, noncondition | |
Electrical Performance | Insulation resistance: 1000 Mohms minimum |
Contact resistance:7 mohms maximum | |
Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s |
Cixi Anshi Communication Equipment Co.,Ltd
Over 30 Years of Experience
Cixi Anshi Communication Equipment has been specializing in jacks
and connectors since 1986. We offer you more than 200
specifications in 10 categories, including fiber-optic distribution
trays and splice closures, drop wire connectors, Cat5E and Cat6E
patch cables, internet connectors, and distribution boxes. About
60% of our products are exported to Southeast Asia, Europe, the
Middle East, Africa and the US.
One New Product Every Month
Our six R&D staff members use advanced testing equipment from
the US. They use computer software such as AutoCAD, Pro/E, 3D MAX
and Photoshop. They also develop one new product every month to
meet your requirements.
OEM/ODM Orders Accepted
Now, we have more than 100 staff members and 20 of them are
technicians at our 4,800 sqm factory. We have two production lines
dedicated to processing your OEM/ODM orders, thus, we produce
$200,000 worth of components every month.
Three Sections to Control Quality
Following ISO 9001:2000 guidelines, our quality control department
includes QC, QE and QA sections. QA staff members check the quality
of all raw and processed materials, while QE personnel are
responsible for the related documents. QC staff members handle your
requests and quality statistics, and make the corresponding
improvements. We use materials from South Korea, the US and Taiwan
to ensure quality. You can have confidence in ordering our
CE-approved products.
Contact Us Today
Call us today for more information.