Multipurpose Industrial Power Supplies System Power Factor >0.99 GPEM1500-A

Multipurpose Industrial Power Supplies System Power Factor >0.99 GPEM1500-A

Quick Details:

Payment & Shipping Terms:

1. GPEM1500-A System Configuration Description

GPEM1500-A consists of distribution unit, rectifier module, conversion module, monitoring module. The configuration is optional, as table below:

2. GPEM1500-A Operating Principle Description

GPEM1500-A consists of two modules: rectifier module (GPR4830A1) and conversion module (GPDA1000VA-G), system configuration is as below:

System Configuration

Two operating methods:

(1) AC input: Startup rectifier module after AC powered-on, outputs -48Vdc, at the same time charge the battery and power the conversion module, conversion module outputs 220Vac.

Under normal conditions, the parameters of rectifier module and distribution unit are all under controll of the monitoring module, operating according to the preset parameters or user’s commands. If AC mains fault, the battery will power to the system, and continue outputing - 48 VDC and 220 vac, with the discharge of the battery, the voltage of the battery starts to descend, when the voltage is under 43.2 V + / - 0.5 V, the monitoring module send battery under-voltage signal and close the load output directly, then the power system will stop working. When external AC mains recovers, the system will normally work again. (All above monitoring data are system default values and can be reset by user)

(2) -48V input: No AC current or no AC be connected, access external power -48V to -48V load port, startup monitoring and conversion module, 220Vac output.

Temperature compensation function is on by default, which can be activated or forbiddened by user’s command if necessary. Operation temperature ≥55℃, the power output of the power supply will be linearly reduced (@65℃,output power will be 1300W).

3. Specifications

4. Application

(1) Integration access

(2) Indoor distribution and extension system

(3) Mobile station and extension coverage system

(4) WLAN

(5) Satellite communication ground station and microwave communication station

(6) Weak current distribution room

(7) Other AC/DC uninterruptible power system

5. Features

(1) Two outputs:-48Vdc, 220Vac

(2) Two inputs:-48Vdc, 220Vac

(3) Adoption of active power factor compensation technology, power factor >0.99

(4) Wide operating range of AC input voltage: 90~280Vac

(5) Wide operating temperature range:-5℃~+55℃

(6) Switch technology conducted,

(7) Perfect battery management prolongs battery lifetime: charge /discharge management, battery temperature compensation, low-voltage protection.

(8) Hot-swappable

(9) Input over/under voltage protection

(10) Output over-voltage protection, output over-current protection, output short-circuit protection

(11) Embedded / wall mounted

(12) RS485, RS232 communication interface

6. Packing and Shipping

Our Delivery Agent

The goods can be shipped by sea, by air, by courier, by land, by train, etc.

Besides the following delivery agent, we can also look for the delivery agent with the best price in china if you need us to do for you.

7. Our Contact Information

Mobile Phone: 0086-13752765943

Telephone: 0086-0755 66600941

Email: info@estel.com.cn

lxf.estel@hotmail.com
Skype: fiona.liang10

Introduction 

Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.

The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.

Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.

“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.

Company Capability

Trade & Market