
Marine MED Approval 5kgs CO2 Fire Extinguisher
1. Products Introduction:
Carbon Dioxide (CO2) fire extinguishers are used for class B and C
fires. CO2 extinguishers contain carbon dioxide,
a non-flammable gas, and are highly pressurized. The pressure is so
great that it is not uncommon for bits of dry ice to shoot out the
nozzle. They don't work very well on class A fires because they may
not be able to displace enough oxygen to put the fire out, causing
it to re-ignite.
2. Maintenance and refillable
1) Once opened fire extinguishers shall be refilled,working
pressure is 1.2MPa (20°c)
2) Two years after produced,and after,every other year 2.1Mpa
hydrostatic pressure test should be done
3) Fire extinguishers' maintenance and re-filling must go to the
professional qualifications repair units
4) Regular check of fire extinguishers pressure indicator lower
than the green zone should be increase the pressure
5) Storage conditions: avoids the sunlight insolation,never in
close to the heat source and moisture
3. How to use CO2 fire extinguisher
1. Pull the Pin at the top of the extinguisher. The pin releases a
locking mechanism and will allow you to discharge the extinguisher.
2. Aim at the base of the fire, not the flames. This is important -
in order to put out the fire, you must extinguish the fuel.
3. Squeeze the lever slowly. This will release the extinguishing
agent in the extinguisher. If the handle is seleased, the discharge
will stop.
4. Sweep from side to side. Using a sweeping motion, move the fire
extinguisher back and forth until the fire is completely out.
Operate the extinguisher from a safe distance, several feet away,
and then move towards the fire once it starts to diminish.
5. Be sure to have read the instructions on your fire extinguisher.
4. Specification
Model | MT-5 |
Out-diameter | Φ152mm |
Volume | 7.5L |
Cylinder Length | 575mm |
Cylinder Weight | 5.5Kg |
Extinguisher Weight | 11Kg |
CO2 Filled Weight | 5Kg |
Temperature Range | -30℃~+60℃ |
Max. Working Pressure | 169.3bar |
Test Pressure | 215bar |
Min. Wall-thickness | 6.02mm |
Material | AA6061 |
Fire Class | 89B |
Packing Size | 21×17×69.5cm |
Jiaxing Seaman Marine Co.,Ltd.
Jiaxing Seaman Marine Co., Ltd. starts business since 2010.
We focus on supplying and exporting the Marine LSA/FFA (lifesaving & fire - fighting) equipments. after several years development, we become one of the most professional exporter in China for marine safety equipment as well as other marine related products, our aim is to be one stop solution service for our customer at most competetive price and high quality goods.
We are not only supply the finished products also the professional accessories/ spare parts in marine safety products line.
Based on our long years and rich experience in China marine
market, we will sure to supply you the "right" products for your
needs.
The products line we are engage in are as below:
- Marine lifesaving equipment;
- Marine fire-fighting equipment;
- Marine rope & ladders,
- Marine navigation equipments;
...
We have established a strong and stabilized distribution
network with customers around more than 15 countries and regions in
the world.
Our customer are from Marine Importer and distributor, Marine Safety Manufacturer,
General Safety,Fire-fighting,Navy, Oil & Gas, Shipyard, even Aviation company.