
Huawei S6720-54C-EI-48S-AC switch is one of the Huawei S6720 series Switches. The S6720 series offers high-availability, scalable 10 Gbit/s server access for Internet Data Centers (IDCs) and large traditional data centers. It also provides optional configuration of 4 x 40 GE QSFP+ interface card gives the S6720-EI Series Switches unusual flexibility: use to provide access to high-bandwidth server-based applications, or as a core or aggregation switch in enterprise campus networks.
S6720-54C-EI-48S-AC Specifications | |
Fixed Ports | 48 × 10 GE SFP+, 2 x 40 GE QSFP+ ports |
Extended Slot | One extended slot for 4 x 40 GE QSFP+ interface card |
MAC Address Table | 288K MAC address entries |
MAC address learning and aging | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
QinQ and selective QinQ | |
IPv4 Routing | Static routing, RIPv1, RIPv2, ECMP, and URPF |
OSPF, IS-IS, and BGP | |
VRRP | |
Policy-based routing | |
Routing policy | |
IPv6 Routing | Static route |
RIPng | |
OSPFv3 | |
BGP4+ | |
ISISv6 | |
IPv6 Features | Neighbor Discovery (ND) |
PMTU | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
MLD v1/v2 snooping | |
Multicast | Static Layer 2 multicast MAC address |
MAC-based multicast forwarding | |
IGMP snooping and IGMP fast leave | |
Multicast VLAN | |
MLD snooping | |
IGMP proxy | |
Controllable multicast | |
Port-based multicast traffic statistics | |
IGMP v1/v2/v3 | |
PIM-SM, PIM-DM, and PIM-SSM | |
MSDP | |
MVPN | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID | |
Rate limiting in each queue and traffic shaping on ports | |
MPLS | MPLS, MPLS VLL, L3VPN |
VPLS | Martini VPLS |
Reliability | STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
BPDU protection, root protection, and loop protection | |
RRPP ring topology and RRPP multi-instance | |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
ERPS (G.8032v2) | |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM | |
E-Trunk | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication and TACACS authentication | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense | |
Blacklist and whitelist | |
Super Virtual Fabric (SVF) | Working as the parent node to vertically virtualize downlink switches as one device for management, supports two-layer clients architecture |
Support as a client node to be managed by SVF parent | |
Management and Maintenance | iStack (using service ports as stack ports) |
MAC Forced Forwarding (MFF) | |
Virtual cable test | |
Ethernet OAM (IEEE 802.3ah and 802.1ag) | |
Local port mirroring and Remote Switched Port Analyzer (RSPAN), allowing an observing port to forward packets | |
Remote configuration and maintenance using Telnet | |
SNMP v1/v2c/v3 | |
RMON | |
Web NMS | |
System logs and alarms of different levels | |
GVRP | |
MUX VLAN | |
Operating Environment | Operating temperature: 0m to 1,800m: 0°C to 45°C; 1,800m to 5,000m: 1°C decrease for every 220m increase in altitude |
Relative humidity: 5% to 95% (non-condensing) | |
Input Voltage | AC: |
Rated voltage range: 100V to 240V, 50 Hz/60 Hz | |
Maximum voltage range: 90V to 264V, 50 Hz/60 Hz | |
Dimensions (W x D x H) | 442 mm x 420 mm x 44.4 mm |
Typical Power Consumption | AC: |
without subcard: 190W | |
with subcard: 209W |
The S6720-EI series switches are next-generation 10G box switches. The S6720-EI can function as an access switch in an Internet data center (IDC) or a core/aggregation switch on a campus network.
The S6720-EI has industry-leading performance, provides line-speed 10GE access ports and line-speed 40GE uplink ports. It can be used in a data center to provide 10 Gbit/s access to servers or function as a core switch on a campus network to provide 10 Gbit/s traffic aggregation. In addition, the S6720-EI provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure data centers.
S6720S-26Q-EI-24S is a compact switch with 220mm depth, perfectly suitable in a 300 mm deep cabinet, saving installation space for customers.
LonRise Equipment Co. Ltd.
The Formation of Lonrise
My Company was founded in 2007 as Cisco distributor and integrator domestically.
After 4 years' steadfast development, it spotted the business abroad. Thus Lonrise stepped on the road as a global CISCO supplier which has owned a good reputation within field .
We not only gain a continued trust from old customers but also attract many new customers.
Lonrise company structure
ABOUT US
Lonrise is specialized in supplying new original sealed Cisco equipment. Our product can create tremendous cost effectiveness for our customer. Our superior service makes our customer's purchasing process a comfortable journey. Lonrise concentrates on the construction of Cisco equipment supply Channel. We are the superior network equipment supplier and source of Cisco new equipment. We are the first choice of your Cisco product source.
Our Office in ShangHai:
Business Partners:
Awards Wall:
Lonrise Team:
Lonrise can low your cost of networking infrastructure. We supply new Cisco equipment around 65%-90% based on global list price. We endeavor to keep our price as low as possible. And meanwhile we struggles to give our best service till each details.
Lonrise supplies all new factory sealed Cisco equipment, including Cisco Routers, Cisco Switches, Cisco Firewall, Cisco module and relative Cisco software and license.
Lonrise people believe that only through creditable management and utmost service, we can win reputation for our company.