OLT C300 GPON EPON Make Mass FTTx roll-out Easier Class B+ 20km - 60km

OLT C300 GPON EPON Make Mass FTTx roll-out Easier Class B+ 20km - 60km

In the face of increasing demands for high bandwidth and multi-play services, operators have to make a balance between economy and mass roll-out. How to smoothly evolve from FTTC, FTTB and FTTCab to FTTH is a challenge in front of telcos nowadays. Operators are considering building a PON network that is green, future-proof and saves TCO.

ZXA10 C300, the world’s first future-proof and largest capability optical access platform, is developed with mass optical access roll-out as well as economy in mind. Its powerful functions and high performance make mass FTTx roll-out easier than ever before.

^{Key Features} Technical Specifications

Unified platform for GPON,EPON and P2P Large capacity and high density:

Meet operators’ requirements for mass optical access roll-out

Future-proof: support NG-PON, like 10G EPON, 10G GPON, WDM PON, and LR PON

Abundant service support capability: IPTV, VoIP, HSI, VPN, mobile backhaul, etc

Diverse interfaces: besides P2MP, P2P and TDM interfaces can also be provided for business and residential application

Enhanced multicast function: meets mass IPTV roll-out

Higher security assurance: ONT authentication, user ID identification, port isolation, address binding, packet filtering, and broadcast packet limitation.

Service differentiation: Comprehensive QoS mechanisms for voice, video and high speed Internet services.

Flexible networking topologies: Various uplink interface and subtending interface

High reliability: key parts redundancy; support Type B and Type C protection for PON downlink and LACP/ STP/RSTP/MSTP for uplink

System Architecture

• Chassis Configuration (21”) Total 23 slots

16 slots for universal line cards 2 slots for switch & control cards 2 slots for power cards

2 slots for uplink and cascading interfaces 1 slot for environment monitoring card

• Chassis Configuration (19”) Total 21 slots

14 slots for universal line cards 2 slots for switch& control cards 2 slots for power cards

2 slots for uplink and cascading interfaces 1 slot for environment monitoring card

ZTE Multi-Service Access Solution

• Subscriber Card Density

GPON card: 8 ports per card EPON card: 8 ports per card P2P card: 16 ports per card

10G EPON card: 4 ports per card

• Uplink interface card

4*10GE uplink per card 4*GE uplink per card

1*STM-4/OC12 or 2*STM-1/OC3 TDM uplink per card

32* E1/T1 uplink card ( balanced and unbalanced)

• Environment monitoring card

2 * Hz/Bit external clock interfaces

5 * Environment monitoring interfaces

PON Features

• EPON compliant with IEEE 802.3ah
• GPON compliant with ITU G.984.x
• 10GEPON compliant with IEEE 802.3v
• Support up to 1:128 optical split ratio for GPON,1:64 optical split ratio for EPON and 1:256 optical split ratio for 10GEPON
• Support OLS (Optical Laser Supervising )
• Physical reach: 20~60km
• Highly-efficient DBA: NSR-DBA,SR-DBA
• 1PPS+TOD,IEEE 1588V2
• Transceiver power: Class B+ or class C+
• Type B and type C optical link protection
• FEC
• AES128
• SCB

L2/L3 Features

• 1:1/N:1 VLAN
• 802.1ad, SVLAN, Selective QinQ, VLAN stacking
• Line-speed forwarding
• STP/RSTP/MSTP compliant with IEEE 802.1d/802.1w/802.1s
• Link aggregation IEEE 802.3ad
• DHCP server, DHCP Relay (option 60/82), DHCP proxy
• L3 routing:
• RMON II
• Multicast – IPTV
• QoS
• Queue & scheduling mechanism: SP, DWRR, SP+DWRR
• IPv4 DSCP Diffserv
• Stream classification, rate limiting, shaping and priority setting

^{ZTE Multi-Service Acc}

• Traffic statistics
• Service based rate limit
• WRED and triple color
• SLA: CIR, PIR, EIR, MBS
• Security

L2- L4 ACL

IEEE 802.1x subscriber authentication IP and MAC source guard Resistance against DOS attacks

MAC/IP anti-spoofing (MAC binding, IP binding, DHCP snooping)

Anti-flooding: broadcast packet suppression, IGMP packet suppression, DHCP packet suppression

MAC address number limit based on VLAN or GEM-port Port mirroring

User port identification such as PPPOE+ and DHCP Option 82

O&M

• Operator security, Multi-privileged operator, SSH v1/v2, FTP/TFTP, ACL
• Management protocol and interface: CLI, Telnet ,SNMP V1/V2C/V3, MIBII
• Remote firmware download and upgrade
• Environment monitoring, control and alarm
• Performance statistics
• Over-heat protection

Environment

• Operating temperature: -5 ºC ~ +45 ºC
• Operating humidity: 5% ~ 95%, non-condensing

Power Supply

• Working voltage: -48 V (±20%) or 220V AC (±20%, 50Hz)

Dimensions

• 449.2mm (H) * 535mm (W) * 270mm (D) (21 inch shelf)
• 443.7mm (H) * 482.6mm (W) * 270mm (D) (19 inch shelf)
• 2200 mm (H) x 600 mm (W) x 300 mm ((D) (Rack)

Weight

• 60kg (Empty rack for 19inch and 21 inch)
• 175kg (19 inch rack)
• 183kg (21 inch Rack)

Power Consumption

• GPON
• 1400W (21 inch rack')
• 1250W (19 inch rack')
• EPON
• 750W (21 inch rack')
• 680W (19 inch rack')
• 10G EPON
• 1250W (21 inch rack')
• 1130W (19 inch rack')

Factory

OPTFOCUS has two office center, The manufacturing center locates in Baoan Industrial area, and the marketing office center locates in Nanshan district of Shenzhen City. Manufacturing center’s land area around 2,000 M²,and it owns three production workshops. One workshop produce Fiber Optical Active Devices. The other two workshops are specialized in producing Passive Components.

Exhibition

Our company have participated a lot of exhibitions all around the world every year.

Customer Evaluation

Our high quality products and outstanding service have won the domestic and foreigner customers. We warmly welcome both domestic and global customers visit us for further negotiation.