
Electrical | |||||
Internal magnetics are 100% electrically tested for functionality per IEEE802.3 requirement | |||||
High performance for maximum EMI suppression | |||||
350uH minmum OCL with 8mA bias current | |||||
1.Current Rating | 1.5 amps | ||||
2.Voltage Rating | 125vac | ||||
3.Insulation Resistance | 500 MΩmin | ||||
4.Contact Resistance | 30 MΩmax | ||||
5.Withstanding Voltage | AC 1500V | ||||
Instertion Loss: | -1.0dB Maximum @100KHz-60MHz | ||||
Return Loss: | -18dB Minimum @1MHz-30MHz | ||||
-14dB Minimum @30MHz-60MHz | |||||
-12dB Minimum @60MHz-80MHz | |||||
-10dB Minimum @80MHz-100MHz | |||||
Common Mode Rejection: | -30dB Minimum @1MHz-100MHz | ||||
Cross Talk: | -30dB Minimum @1MHz-100MHz | ||||
Mechanical | |||||
2.Retention Strength | 7.7KG.F min between jack and plug | ||||
3.Durability | 800 mating cycles min | ||||
Material | |||||
1.Housing | PBT(UL94V-0) PA66(UL94V-0) PA46(UL94V-0) LCP(UL94V-0) | ||||
2.Contact Wire | Diameter 0.45mm phosphor bronze gold plating over nickel 0.35mm thickness phosphor bronze alloy selective gold plating over nickel | ||||
3.Shield | 0.20~0.25mm thickness brass with tin plated | ||||
4.Gold Plating | 6u" , 15u" , 30u" , 50u" . | ||||
5.LED Specification | Standard LED Color: | LED Wavelength: | Forward (V MAX): | Typical (V TYP): | Luminous Intensity: |
Green | 560-580 nm | 2.5V | 2.1-2.2V | 9-25 MCD | |
Yellow | 580-610 nm | 2.5V | 2.1-2.2V | 9-30 MCD | |
Orange | 580-610 nm | 2.5V | 2.1-2.2V | 50-100 MCD | |
1. LED intensity/wavelength measured with Photo Research PR-650
Colormeter 2. With a forward current of 20 mA,Absolute Maximum Ratings (Ta=25℃) | |||||
6.RoHS peak wave solder | RoHS-6 peak wave solder temperature rating 260℃±5℃ | ||||
Operating and Storage Temperature: | |||||
Operating Temperature: | -40℃ to 85℃ | ||||
Storage Temperature: | -40℃ to 85℃ |
NOTES:
MATERIAL:
1. HOUSING:HIGH TEMPERATURE THERMOPLASTIC UL94-VO,BLACK;
2. SHELL:SUS304, T=0.15mm
3. CONTACT:PHOSPHOR BRONZE T=0.15mm
FINISH:
1. CONTACT:100u" MIN TIN ON SOLDER AREA ALL OVER
50u" MIN NICKEL ON ENTIRE CONTACT.
+3u" MIN GOLD PLATING ON CONTACT AREA.
2. SHELL:CLEAN
3.PACKING:TAPE&REEL
Why Choose PengHui
Unit Price
Charge only 35% ~ 60% of Pulse , (Midcom), Bothhand Belfuse, Tyco,
Halo,....Etc
All the step are doing by ourself. So we can control the cost
PHC have more than 30 units automation equipments to product as
possible
PHC consists of 3 subordinations , located partly in Hunan ,Hubei
,Guangdong .
With large scale of production lines, we can reach to cost
reduction at the most extent
Service
PHC Offer good pre-sales & after-sales service &Strong
technical support
1) New Project: Strong technical and ideal support your new design
2) Existing projects: Try to help customer to save the cost to
offer the good quality product and save
3) time.
4) Free Samples:3-5 PCS of each part number
5) Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping
safe and fast.
6) Customer complaint:24-48 hours reply 8D report
7) Warranty : 24 months ( Merchandise are promised to be promptly
returned, replacement,,or repair
8) kits if customers are not satisfied)
Quality :
World’s Leader supplier of Integrated RJ45 Connector and PCB
connector
Except the plating ,From Design tooling, stamping ,Injection
molding, assemble, Testing , packing .All the step are
doing by ourself. So we can control the quality.
1. Manufactured under strict controls.
2. ISO 9001:2008
3. UL Certification
4. Reach Cetitifaction
5. RoHS compliance
6. OEM for PULSE
7. Active Environmental policy
8. Every module tested 3times (not just batch tested)
Production&Testing
PHC have more than 30 units automation equipments to product as
possible
PHC Every Magnetic RJ45 tested 3times (not just batch tested)
PHC Every SMT part used Automation testing and packing.
Automation product line
vertical injection molding machine
Wish To Be Your Best Supplier and Supporter In Your Lan connector
Solutions
------------- PHC Sales & Support Team
Dongguan Penghui Electronics Co., Ltd.
PengHui Electronics Co., LTD was founded in July 2006,is Located in ChangAn Dong Guan Guang Dong of China,Factory covers an area of 8000 square meters,More than 300 employees.In 2009 August we set up a production factoryin HuNan; In 2010 we got the ISO9001-2008 and UL Certification. PengHui Focus on design, production, sales&services and provide ODM/OEM in connector.
At present Company has10 units Stamping machine, 20units injection molding,more than 30 units Automata, and many test equipment,Except the plating ,from Mold design ,injection molding, stamping,assembly, packaging,testing process,are all by our factory. So we can control the cost and quality better. Our main product: Modular RJ45 JACK, RJ1,RJ45 with transformers connectors, Pin header&Female header,FPC,SFP,USB,CARD CONNECTOR etc,.
Since the company found ,PengHui have more and more high tech talen and advanced manufacturing technology,Our product are exported to the Americas,the Europe, the Middle East,Southeast Asia and other places.And also established strategic partnership of long-term. To many well known customer in foreign. Our clients include consumer electronics,home appliances,communications equipment,power system, Pay system,and securlty,automtive,medical and other industries. The Main customers:HUAWEI, MOTO, HITACHI, HISENSE, FLEXTRONICS, LIANDI, PAX, STAR-NET,NEWLAND AND so on.
After nearly ten years of efforts, with innovative products ,excellent quality,accurate delivery and excellent service,great to win customers trust and praise, and establish a good reputation within the industry,We believe: customer has a bright future, we just have beautiful tomorrow!